Select both locations where the Cat 6 cable will be terminated. Drill a one-half-inch hole in both of the walls where the Cat 6 cable will be terminated.
|
Yunnan Nanyue Electric Power Equipment Co., Ltd.
|
Product (500)
-
Overhead Power Lines Conductor Tension Stringing Equipment
(137)
- Hydraulic Cable Puller (2)
- Hydraulic Cable Tensioner (1)
- Conductor Transmission Stringing Blocks (1)
- Cable Winch Puller (8)
- Anti-twisting Braided Wire Rope (1)
- Cable Pulley Blocks (6)
- Reels and Reel Stands (9)
- Reel Winder Machines (3)
- Come-A-Long Clamps And Wire Rope Grips (11)
- Compression Joint Tools Conductor Cutters (11)
- Conductor Installation Tools and Devices (12)
- OPGW Fiber Optic Cable Installation Stringing Equipment (9)
- Cable Installation Machine and Cable Tools (13)
- Miscellaneous Tools (11)
- Tackle Blocks (5)
- Tightening Tools (8)
- Conductor Lifting Hoists (5)
- Safety Tools and Accessories (6)
- Tower Erection Gin Poles (3)
- Emergency Restoration Tower and Crossing Structures (3)
- Wrenches Tools (5)
- Punch and Bending Tools (3)
- Earth Anchors (1)
- Hydraulic Conductor Cable stringing Winch Puller Tensioner (18)
- Power Transmission Line Conductor Stringing Equipment Tools (8)
- underground electrical wire cable pulling equipment & tools (8)
- Power Transmission and Distribution Line Stringing Equipment (10)
- OPGW Fiber Optic Power Cable Stringing Equipment and Tools (6)
- Conductor Transmission Stringing Cable Pulley Blocks (18)
- Aerial power transmission line powerline inspection Drones (6)
- Anti twist braided steel pilot wire rope (3)
- Industrial Digital Wireless Electronic Hand Dynamometer (10)
- Carbon Dioxide Mining Fracturing Equipment (12)
- Electrical Transformer (9)
- Current Transformer and Potential Transformer (18)
- Circuit Breaker (12)
-
Switch & Switchgear
(24)
- Universal changeover switch (3)
- Switchgear Panel (6)
- Gas Insulated Switchgear (3)
- Disconnect Switch (4)
- Earthing Switch (2)
- Load Break Switch (6)
-
Arrester & Insulator
(16)
- Arresters (4)
- Insulators (12)
- Generating Set (4)
- Wind Turbine System (5)
- Hydro Turbine System (4)
- Electrical Power Fittings (61)
- Cut-Out Fuse (5)
- Miniature Circuit Breakers (31)
- Residusal Current Circuit Breaker (21)
- Circuit Beaker (18)
- Relays (28)
- Plug Socket Coupling (1)
- Box (7)
FAQ (45)
Industry News and Events (56)
News (13)
Trade shows & Events (7)
Certificates (5)
Credit Report
Products Index
Company Info
Yunnan Nanyue Electric Power Equipment Co., Ltd. [China (Mainland)]
Business Type:Manufacturer
City: Kunming
Province/State: Yunnan
Country/Region: China (Mainland)
Follow Us:
|
Sandra:
|
FAQ
Instructions
- 1
- 2Push the end of the fish tape through first hole and carefully guide the fish tape to the second Cat 6 hole, pushing the tape slowly along the cable run. When the fish tape end touches the inside of the wall where the second Cat 6 hole is located, go to the second Cat 6 hole.
- 3Push the coat hanger hook end through the second Cat 6 hole. Guide the hanger to "hook" the loop at the end of the fish tape. Pull the fish tape end through the hole.
- 4Tie the end of the Cat 6 cable to the fish tape loop. Push the fish tape end and the Cat 6 end back through the second hole. Unwind Cat6 cable from the spool so that the length of loose cable is longer than the cable run.
- 5Go to the first hole and pull the fish tape slowly until the end of the fish tape and the Cat 6 cable reach the hole. Carefully pull the fish tape and Cat 6 cable through the hole.
- 1
Tips & Warnings
- A second person to help guide the cable throughout the cable pulling process is recommended.
- Never exceed 25 pounds of pull on the cable.
