Quality FIN Residual current circuit breaker from China manufacturer - Yunnan Nanyue Electric Power Equipment Co., Ltd.

Quality FIN Residual current circuit breaker

Payment Terms:	T/T,L/C,WU,Paypal
Place of Origin:	Yunnan, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean,Land

Packing: Export Standard package

Brand Name: Nanyue

Production Capacity: 100000

Delivery Date: Delivery in 5 work days aft...

FI-100 RCCR is in conformity with the standard of IEC61008.The RCCB can cut off the fault circuit
immediately on the occasion of shock hazard or ear

Application

Residual Current Device(RCD) FIN is in conformity with the standard of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.
FIN ELCB is mainly suitable for using in varieties of plants,enterprises,buildings,constructions, commerce,guesthouses and families.It can be used in circuits of 1 phase 230V and 3 phase 400V 50/60Hz.

▲Specifications

Number of poles	2P,4P
Rated current (A)	16,20,25,32,40,50,63
Rated residual operating current(I△n)(mA)	30,100,300,500
Rated residual non-operating current(I△no)(mA)	≤0.5I△n
Rated voltage (V)	AC230/240
Residual current off-time	≤0.1S
Short circuit capacity (Icu)	3000A
Endurance	≥4000
Protection Degree	IP20

▲Operation principle

Overall and mounting dimensions(unit:mm)

Normal operation and mounting requirement
Circumstace temperature-5℃~+ 40℃,average temperature not exceeding 35℃. Altitude above sea level less than 2000m. Humidity not exceeding 50% at 40℃ and not exceeding 90% at 25℃. Installation classⅡ or Ⅲ. Pollution class Ⅱ. Installtion method DIN Rail mounting type. The external magnetism shall not be more than 5 times of terrestrial one. Product shall be installed vertically at the place where there shall be no severe impact and vibration.The product is switched on when the handle is at upper position.

Normal operation and mounting requirement

Circumstace temperature-5℃~+ 40℃,average temperature not exceeding 35℃.
Altitude above sea level less than 2000m.
Humidity not exceeding 50% at 40℃ and not exceeding 90% at 25℃.
Installation classⅡ or Ⅲ.
Pollution class Ⅱ.
Installtion method DIN Rail mounting type.
The external magnetism shall not be more than 5 times of terrestrial one.
Product shall be installed vertically at the place where there shall be no severe impact and vibration.The product is
switched on when the handle is at upper position.